H44X (SFCV) RUBBER DISC CHECK VALVE

Product profile

H44X rubber flap check valve is mainly composed of valve body, valve cover and rubber flap. The rubber flap in the valveis made of steel plate as a substrate and the outer layer is covered with rubber. H44X rubber flap check valve adopts fu flowarea design, with small head loss, not easy to accumulate debris, easy maintenance and other characteristics.The H44X rubber flap check valve is mainly suitable for horizontal mounting water supply and drainage systems. lt can beinstalled at the water outlet of the pump to prevent backflow and water hammer damage to the pump. The valve can also beinstalled on the bypass pipe of the reservoir inlet and outlet pipe to prevent the pool water from flowing back into the water supplysystem.

Attention and characteristics

Note: The check valve only allows the medium to flow in one direction. Special attention should be paid to the flow directionof the medium, and the normal flow direction of the medium should be consistent with the direction of the arrow indicated on thevalve body, otherwise the normal flow of the medium will be cut off.Features: Tilt design, short closing time. The valve disc is made of rubber and steel plate pressed at high temperature, whichis resistant to erosion, good sealing performance, simple structure, convenient maintenance, maintenance and transportation.

Typical installation Diagram

Each filter is packed in protective cartons with foam cushioning for safe transport.